Trying AWE in STM32F469-Disco Board

(From customer),

It can’t work well after porting AWE BSP from ‘AWE BSP stm32f407 v1.2’ to stm32f469i-disco platform.

There is no correct data are processed in transmit complete callback function. Indeed, this instruction ‘pUSBSamples = ZeroedSamples’ also be executed while usb audio data are transferring, which causes fault audio data shown as below screen shot.

Is there any suggestion for this issue?

Is there a document or example? To introduce how to set parameters of modules by software instructions (without audio weaver). Thanks.

Source code from AWE BSP stm32f407 v1.2.

if (nSamplesAvail >= OUTPUT_BLOCKSIZE)

    {     

        // Read a block of samples from the ASRC jitter buffer

        dspc_asrc_read_output_linear_Q15(&USB_ASRC, USB_ASRCSamples, OUTPUT_BLOCKSIZE);    

        pUSBSamples = USB_ASRCSamples;      

    }

    else

    {

        // Insert zeros if no audio samples available (CODEC continually runs)

        pUSBSamples = ZeroedSamples;              

    }