This is an interesting bug...
1. Create a subsystem
2. Add a module in the subsystem with an inspector... for example, Scaler - call this subsys1.Scaler
3. Copy and paste the subsystem. Now you have subsys2.Scaler
4. Now, open the inspector of subsys1.Scaler
5. Without closing the inspector, open the inspector for subsys2.Scaler... what you'll see is that the other inspector will close first and then the new inspector will be opened. Both of them cannot be opened simultaneously.
Copying and pasting the scaler within the same subsystem works fine. It's only when you copy and paste the subsystem itself.
8:46pm
Hello Cole,
I could not get the issue to repeat on my end. I'm using AWE Designer master-build438 Pro. Could you please let me know what version of Designer you're seeing this issue in?
Thanks,
Kevin
8:50pm
build382 Pro.
Sorry I missed a step:
1. Create a subsystem
2. Add a module in the subsystem with an inspector... for example, Scaler - call this subsys1.Scaler
3. Open the inspector for subsys1.Scaler. Then close it.
4. Copy and paste the subsystem. Now you have subsys2.Scaler
5. Now, open the inspector of subsys1.Scaler
6. Without closing the inspector, open the inspector for subsys2.Scaler... what you'll see is that the other inspector will close first and then the new inspector will be opened. Both of them cannot be opened simultaneously.
8:56pm
Hi Cole,
I experience the same issue, once adding that step. It is odd for sure, but I will log it with the development team. Thanks for reporting.
Regards,
Kevin