Answer: Currently supported development boards are:
STM32F407 Discovery Board (ARM Cortex-M4)
STM32L496 Discovery Board (ARM Cortex-M4)
STM32F746 Discovery Board (ARM Cortex-M7)
Atmel SAMV7 xPlained (ARM Cortex-M7)
BeagleBone Black (ARM Cortex-A8)
Wandboard WBQuad (ARM Cortex-A9)
Raspberry Pi 2 (ARM Cortex-A7)
Analog Devices ADSP-21469 EZ-KIT
Analog Devices ADSP-21479 EZ-KIT
Analog Devices ADSP-21489 EZ-KIT
Analog Devices SC589-EZLITE
12:55pm
I was given a STM32F723E discovery board at a ST conference saying that it will work with AWD?
10:25am
Hi Sid,
Any hardware can be configured to connect to Designer and run the Audio Weaver core. The list of supported development boards provided above is just a list of boards for which we have specific user guides and BSPs.
I would recommend you use the documentation and BSP provided for the STM32F746 as a starting point for your STM32F723E board. The BSP for the ST boards will be available shortly at www.dspconcepts.com/st, and the user guides are available at www.dspconcepts.com/support.
Good luck!
-Axel
7:09am
Hi Axel,
sorry for bringing up an old thread.
I have searched through your website trying to find BSP and user guides for ST development boards that are supported by AWE, but have not had any luck.
Then I came across this thread, but the links above did not help either: www.dspconcepts.com/st and www.dspconcepts.com/support
Can you please point me in the right direction?
Kind regards,
Steinar
7:10am
Hi Axel,
sorry for bringing up an old thread.
I have searched through your website trying to find BSP and user guides for ST development boards that are supported by AWE, but have not had any luck.
Then I came across this thread, but the links above did not help either: www.dspconcepts.com/st and www.dspconcepts.com/support
Can you please point me in the right direction?
Kind regards,
Steinar
10:41am
Hey Steinar,
The ST BSP's are still available, and the license for them is free! You'll just have to reach out to sales to get access to the supported BSPs and documentation. See this link (https://audioofthings.dspconcepts.com/speak-with-sales) or email sales@dspconcepts.com
-Axel
3:26pm
Hi, I read on another post that AWE core is locked on 3 STM processors (for the ST version). IS it possible to run it on the sensortile board from ST which is based on a STM32L476 processor (and not the STM32L496 of the supported discovery) ?
In that case, are we allowed to do the adaptation ?
thanks
9:49am
Hello,
The AWE Core included in the ST BSPs are locked only to all ST processors, not to specific ST processors. So there is nothing preventing you from modifying the ST BSP code (using the STM32L496 as reference) and running the included AWE Core with the SensorTile board.
Good luck!
-Axel
4:53am
Thanks for clarification - Great news.
regards
5:10pm
Hi,
Regarding the ADSP-BF706 EZ-KIT Mini are already available examples or a BSP for easy starting with the board. Is the adaptive LMS block included for this?
Thanks
12:01pm
Hey Andres,
Thanks for your interest in Audio Weaver.
We do not currently have support for Blackfin processors with our Audio Weaver libraries, or with any reference BSPs.
The LMS module is part of the Advanced module pack, which is only included in the full, purchasable BSPs.
Thanks
Axel
2:01pm
Any further information available for the ADI SC589-EZLITE?
We have both the ADI SC589-EZLUTE and the Danvile 589SOC that we would like to address with Audio Weaver.
Thanks,
Phil
10:48am
Hi Phil,
We have a reference BSP for the ADI SC589 EZKit Lite that we will be posting in the next few days. I'll include the link on this page when we make the downloads live.
Thanks
-Axel
9:52pm
Do any of the supported development boards handle 192Khz stereo audio in and out ?
10:08am
Hey Jim,
The ADI-21489 EZKit has a ADI-1939 codec chip and can handle 192 KHz audio input and output.
Thanks
-Axel
3:55am
Hello
I am confused about Blackfin DSP support.
On the site are indicated as supported https://dspconcepts.com/blog/audio-weaver-cad-audio instead here I read that they are not supported.
Where am I doing wrong?
Thanks
1:07pm
Hello Alkaline,
We don't support Blackfin anymore.
Thanks,
Kevin
1:28pm
Hi Kevin
Thanks for the reply
Regards
5:18am
Is the list at the top of this thread still updated?
I'm an intern at a company that has tasked me with getting a development board using the "biggest/best/strongest" stm32 chip, that is supported by the ST version of audio weaver, in order to test it out against their current solutions.
Can you guys comment/give suggestions on which development board would fit?
Regards.
Anders
12:57pm
Hi Anders,
That list is quite dated and is not comprehensive. We are working on creating an updated list of supported demo platforms and reference designs, but for ST Audio Weaver users the offering is fairly limited. With the free ST Audio Weaver license, you can download from our website a sample BSP for the STM32F407 and STM32F769 which include AWE Core embedded libraries for the ARM Cortex-M4 and ARM Cortex-M7. These libraries support a subset of Audio Weaver's modules which are identified in the packages' AWECore/Include/ModuleList.h file.
Thanks,
Michael
7:56am
Hi Micheal
Where can i find the updated List of supported dev boards ? and do you provide a bsp for each of them ?
Thanks ,
7:56am
Hi Micheal
Where can i find the updated List of supported dev boards ? and do you provide a bsp for each of them ?
Thanks ,