Hi,
I am really enjoying working with Audioweaver with so many modules readily available there. As being new to the system offering so many modules it is sometimes hard to find the correct ones. My system is utulizing WOLA and now I would like to see WOLA bins/frequency response before EQ, use some EQ block and then see my results (WOLA bins/frequency response) in real-time. Do you have any example for this or recommendation with which blocks to start with?
Best, Mike
1:40pm
Hello Mike,
You can actually do this without the WOLA module. Our Sink Display Module has a built in FFT. There is a drop list that switches between time and frequency domains. You can also use a Rebuffer module to increase the frequency resolution (larger FFT).
Thanks,
Kevin
1:50pm
Good to know, thanks. But If I am doing some processing in WOLA domain and would like to see the frequency response after that complex processing and correct it with some DSPC's EQ in WOLA domain, I can not use Sink Display Module, right?
4:34pm
Hi Mike,
Ok, got you. That's right, that won't work. For this, you can use the Complex Magnitude module to feed the Sink module to plot the magnitude of the WOLA.
Thanks,
Kevin