In AWE 8.C.1.2 Pro we get the following error (tested with MATLAB 2018a and MATLAB 2021a in Windows 10 Enterprise):
Index exceeds array bounds.
Error in awe_inspect
Error in awe_module/draw_subsystem
Error while evaluating Menu Callback.
while in AWE 8.B.1.4.B Pro it works fine.
10:47am
Thank you for reporting this bug and providing information about which versions you've tested in.
Can you offer some precise details on what actions are leading to the failure? Documenting those steps will help us in reproducing and diagnosing the issue.
Thanks,
Michael
10:57am
Sure, the sequence to reproduce: Make, build and run a layout containing a meter with multiple channels in MATLAB in native mode (pc). Then do either of the following:
a. MATLAB: draw(SYS); --> right-click the meter module in the MATLAB figure window and click "Inspect"
or
b. MATLAB: inspect(SYS.my_meter)
Then check the MATLAB command window output which gives the index error explained in my previous post.
I haven't tested it in AWE Designer.
12:20pm
Thank you for the additional details. I have enough information to file a ticket with our software development team.
Thanks again,
Michael